IMPORTANT SAFETY INSTRUCTIONS

￿Do not install or use a washer with visible damage.

￿Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these operating instructions.

￿Ensure power is not supplied to the appliance while maintenance or repair work is being performed. The machine is only completely isolated from the electrical supply when it is turned off at the main switch and the plug is pulled, or by tripping the circuit breaker.

￿Connect the washer, to the water mains. Do not use old hoses. Inspect the intake hoses regularly for damage. They should be replaced as needed to prevent water damage.

￿Faulty components must only be replaced with genuine Miele spare parts.

￿If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord.

￿Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, turn on all hot water faucets and let the water flow from each for several minutes before using the washing machine. This will release any built-up hydrogen gas. Do not smoke or use an open flame during this time, the gas is flammable.

￿Remove the door before the appliance is removed for service or discarded.

4

Page 4
Image 4
Miele 07 509 320 operating instructions Important Safety Instructions