Installation
^Fit a screw a in to the center of the first long hole.
^Check the alignment of the unit, then fit another screw a into the other long hole.
^Tighten both screws.
^Place the appliance in the niche. Using both hands on the back of the microwave interior move it into place. The microwave will engage into position once it is correctly installed.
^Check the alignment.
^If it is not aligned correctly, pull the appliance out of the niche and realign it by slightly adjusting the bracket on the long holes.
^Once correctly aligned, to prevent the unit from moving insert a third screw a into the middle of the bracket.
^Slide the unit into the niche, pulling the plug and cable through the back.
^Connect the electrical supply.
^Push the appliance all the way in to the niche as described above.
56
