Installing the appliance
Do not remove the installation supports from the appliance door. They will be used later in the installation niche.
There are transportation safety devices inside the appliance to protect the shelves and storage compartments until installation is complete. Do not remove them, or parts may be damaged.
Check the appliance for damage in transit.
Do not install the appliance if it is visibly damaged. If in doubt, contact your dealer.
Loosen the bracket that holds the appliance to the pallet.
Caution! The appliance is no longer secured and may be unstable.
From the rear of the appliance carefully lift it from the pallet.
Once the appliance is on the ground it can be wheeled around.
RemoteVision module installation
(optional accessory)
Always disconnect the appliance from the power supply when performing installation, maintenance or service work.
Install the RemoteVision module before placing the appliance in its installation niche.
Once connected the RemoteVision module will increase the energy consumption of the appliance.
The slot for the RemoteVision module is located in the lower area of the back of your appliance.
49
