Installing the appliance
Aligning the housing unit | Check the installation niche |
The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance.
–The side panels of the housing must be even.
–The housing unit panels must be at least 5/8" (16 mm) thick.
–The plinth facing must be at least 1/2" (13 mm) thick, preferably 3/4" 19 mm).
To ensure a safe,
Check the base (see "Installation").
Check the dimensions of the cavity.
Check that the cavity is square.
Check the location of the power outlet.
Check that all furniture parts in the vicinity of the appliance are securely connected to the wall.
Check that the adjacent furniture/fixtures do not collide with the open door.
Before installation
Caution - the appliance is very heavy. Use caution when unpacking and opening the door, danger of tipping.
To protect the base from damage during installation, attach a hard board, linoleum, etc., to the floor in front of the intended installation location.
Remove any cable clips from the back of the appliance.
Take the supplied accessories out of the protective packaging.
48
