Miele CS1312, CS1322 installation instructions Preparing the worktop

Preparing the worktop

￿Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance(s).

See "Safety instructions for installation".

￿Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture.

If, during installation, you find that the seals on the corners of the frame are not flush with the worktop surface, the corner radius (￿ R4) can be carefully scribed to fit.

31