Miele CS1322 Installation of several appliances, Worktop cut-out- two appliances, Number of

Installation of several appliances

When installing two or more appliances next to each other a spacer bar b must be used between each one.

See "Fixing the spring clamps and spacer bars".

Worktop cut-out - two appliances

Worktop cut-out

- three appliances

To calculate the cut-out width (D) required:

Add up the widths of each appliance (e.g. width A + B + C etc.) and subtract 16 mm from this figure

(i.e. 8 mm is taken off either end of the appliance run).

Number of	Appliance width in mm	Worktop cut-out in mm
appliances
1	288	288	- 16 = 272
2	288, 288	288	+ 288	- 16	= 560
2	288, 380	288	+ 380	- 16	= 652
3	288, 288, 288	288	+ 288	+ 288 - 16		= 848
3	288, 288, 380	288	+ 288	+ 380 - 16		= 940

32