Miele CS 1221 Installation of multiple appliances, Countertop cut-outtwo appliances

Installation

Installation of multiple appliances

When installing more than one combiset appliance, a support bar b must be installed between the appliances.

Countertop cut-out two appliances

Countertop cut-out three appliances

For the installation of two appliances the width of the countertop cut-out D is the sum of A and C.

A, B and C = appliance width 11 5/16", 15" or 22 11/16"

(288 mm, 380 mm or 576 mm) minus 5/16" (8 mm) to allow for the overhang

D = width of the countertop cut-out

For the installation of three appliances the width of the countertop cut-out D is the sum of A and B and C.

If more than three appliances are being installed, you will need to add, A, B or C for each additional appliance.

36