Miele CS 1221 installation instructions Technical Safety, Important Safety Instructions

Models: CS 1221

1 48
Download 48 pages 39.09 Kb
Page 5
Image 5
Technical Safety

IMPORTANT SAFETY INSTRUCTIONS

Technical Safety

￿Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

￿Be sure your appliance is properly installed and grounded by a qualified technician.

￿Before installing the combiset, check for externally visible damage. Do not operate a damaged appliance.

￿To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

￿Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and appliance damage. Consult a qualified electrician if in doubt.

￿The combiset is not designed for use with an external timer or a remote control system.

￿Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance.

￿Before servicing, disconnect the appliance from the main power supply.

￿Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Ser- vice Department.

￿Under no circumstances open the outer casing of the appliance.

￿While the appliance is under warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.

￿In the event of any damage to the

appliance, it must be turned off immedi- ately and disconnected from the main power supply. Contact Miele’s Technical Service Department.

Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.

￿Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.

5

Page 5
Image 5
Miele CS 1221 installation instructions Technical Safety, Important Safety Instructions