Frequently asked questions
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage.
What if the burner does not heat up after it is turned on?
Possible fault | Solution |
|
|
The Child safety lock is activated. | See "Child safety lock". |
|
|
The Overheating protection feature | See "Overheating protection". |
has activated. |
|
|
|
The main fuse has blown. | Check the main fuse. |
| Replace the fuse or "trip" the circuit breaker. |
|
|
The | To |
When demo mode is activated, d | (approx. 1 sec) to the left, two times, all the |
will appear in the display for a few | way to the stop, then turn it a third time and |
seconds after turning the | hold for approx. 3 seconds. |
appliance on. |
|
|
|
If none of the above is the case, turn the control knob to "0", and disconnect the appliance from the electrical supply for 1 minute.
Reconnect the power and turn the appliance on. If it still does not heat, contact Miele Technical Service.
What if ß appears in the display?
Possible fault | Solution |
|
|
The burner is turned on but no | Turn the burner off and place suitable |
cookware is placed on it. | cookware on it. |
|
|
The pan being used is not suitable | See "Cookware" for information on type and |
for the combiset or is not the right | size of suitable cookware. |
size. |
|
|
|
What if an F appears in the display? | |
|
|
Possible fault | Solution |
|
|
The temperature sensor for the | Do not use the combiset until it has been |
burner is faulty. | repaired. Contact Miele Technical Service. |
25
