Operation
To switch the cooktop lighting on
The cooktop lighting can be switched on and off independently of the fan.
Briefly press the lighting control to switch on the cooktop lighting.
The indicator lamp will come on.
The cooktop lighting will switch on at maximum brightness.
To dim the cooktop lighting
The brightness of the lighting can be adjusted.
With the lighting switched on, press and hold the cooktop lighting control in.
The brightness will gradually dim until you release the control.
Press the touch control in again to increase the brightness to the level required, and then release it.
If you keep the control pressed in, the light will continually change between bright and dim.
Safety
Should the rangehood be left on, the fan will switch off automatically after 10 hours. The lighting will remain on.
Pressing the On/Off control will switch the fan back on again.
Filter operating hours counter
The number of hours the appliance has been in operation is stored in memory.
The operating hours counter tells you when the grease filters or charcoal filter need to be cleaned or replaced.
Resetting the operating hours counter for the grease filters
After 30 hours of operation (or another time if the operating hours counter has been altered), the grease filter indicator lamp will light up. The grease filters must then be cleaned.
Afterwards, the filter operating hours counter must be reset.
To switch the cooktop lighting off
Press the cooktop lighting touch control briefly to switch the lighting off.
The indicator lamp will go out.
To do this, press and hold the grease filter touch control in for original setting 3 seconds while the fan is switched on.
The indicator lamp for the touch control will go out.
16
