Installation
3 protective sheets
for use when fitting the tower.
1 exhaust connection for exhaust ducting 150 mm.
1 reducing collar
for exhaust ducting 125 mm.
1
for fitting into the exhaust connection on the motor unit (not needed for recirculation mode)
Telescopic wall bracket
for securing the rangehood to the wall.
Conversion kit for recirculation mode
including directional unit and flexible aluminium hose with clips (this is not included, but is available as an optional extra - see Technical Data).
6 screws 5 x 40 mm and
6 x S 8 plugs
for securing the wall bracket.
The screws and plugs are designed for use in solid walls only. For other types of wall construction, alternative fixings will be required. Make sure that the wall is able to take the weight of the rangehood.
2 x M 6
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever for dismantling the tower.
Installation instructions
29