Miele DA 429-4 EXT Grease filters, Cleaning and care, Titanium and special order finishes

Models: DA 428-4 EXT DA 429-4 DA 429-4 EXT DA 428-4

1 40
Download 40 pages 38.84 Kb
Page 21
Image 21
Important for appliances with special finish

Cleaning and care

Important for appliances with special finish

(Titanium and special order finishes)

Please follow the information given in “General notes" earlier in this section. However, please be aware that it is very difficult to clean this type of surface without causing minor marks to the surface material.

This can become particularly noticeable with darker colours and if there is halogen lighting in the kitchen.

Controls

The controls may suffer discolouration or damage if soiling is left on them for too long. Remove soiling straight away.

Please observe the "General notes" on cleaning.

Do not use stainless steel cleaning agents on the controls.

Grease filters

The re-usable metal grease filters in the appliance remove solid particles (grease, dust, etc.) from the kitchen vapours, preventing soiling of the rangehood.

The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease but always clean immediately if the grease filter touch control lamp comes on.

￿An oversaturated filter is a fire hazard.

￿To take out the grease filters, release the locking clip on the filter, lower the filter 45°, unhook it at the back and remove it.

To avoid damaging the filter or the cooktop below, make sure you hold the filter securely at all times when handling it.

21

Page 21
Image 21
Miele DA 429-4 EXT, DA 428-4 Grease filters, Cleaning and care, Important for appliances with special finish, Controls