Electrical connection
All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations.
Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable.
Ensure power is not supplied to the appliance until after installation or repair work has been carried out.
Do not connect the appliance to the mains electricity supply by an extension lead. These do not guarantee the required safety of the appliance.
The connection data is given on the data plate. This is visible when the grease filters have been removed. Ensure that this data matches the household mains supply.
Connection of this appliance should be made via a suitable isolator which complies with national and local safety regulations and the
If the switch is not accessible after installation, an additional means of disconnection must be provided for all poles.
For extra safety, it is advisable to install a suitable residual current device (RCD). Contact a qualified electrician for advice.
Important
This appliance is supplied for connection to an AC 230 V single phase 50 Hz supply.
The wires in the mains lead are coloured in accordance with the following code:
Green/yellow | = earth |
Blue | = neutral |
Brown | = live |
WARNING:
THIS APPLIANCE MUST BE
EARTHED
34
