Miele dishwashers installation instructions Mmol/l Button German Scale

Before using for the first time

^1. Open the door.

^2. Switch the dishwasher off using the "Off" button.

^3. Press the a and c buttons in and whilst doing so switch the dishwasher on using the "On" button.

^4. Then release these buttons.

The "Salt" and b indicator lights will flash.

If this is not the case the process must be repeated.

^5. Press the b button.

The b indicator light will go out and the "Salt" indicator light will flash.

Setting the machine for water hard- ness level 0.2 - 2.5 mmol/l (1°d - 14°d):

An indicator light will come on next to one of the a - e buttons. This repre- sents the water hardness level set in the machine. See Table 1.

Table 1:

°d			mmol/l	Button
(German
scale)
1	-	4	0.2 - 0.7	a
5	-	7	0.9 - 1.3	b
		8	1.4	c
9	- 11		1.6 - 2.0	d
12	- 14		2.2 - 2.5	e

If this value corresponds to your water hardness level:

^Switch the dishwasher off using the "Off" button.

If you would like to change the setting for a different water hardness level:

^Press the button which corresponds to the water hardness level in your area (see Table 1).

The "Salt" and b indicator lights will flash.

^Press button f twice.

The "Salt" and f indicator lights will flash.

^Switch the dishwasher off using the "Off" button.

The programmed water hardness level is now stored in memory.

15