Miele dishwashers Drying heat, Activation/Deactivation of drying heat, Operating the dishwasher

Operating the dishwasher

Drying heat

In all programmes the drying process is assisted by the heating element. Drying heat is set as activated at the factory.

Switching the heating elements off dur- ing drying will save approx. 0.1 kWh in electricity. The dishes are then dried with residual heat. Open the dish- washer door at the end of a programme to allow the dishes to dry better.

Activation/Deactivation of drying heat

^Open the door.

^Switch the dishwasher off using the "Off" button (16).

^Press the a and c buttons in and whilst doing so switch the dishwasher on using the "On" button.

^Then release these buttons.

The "Salt" and b indicator lights will flash.

If this is not the case the process must be repeated.

Drying heat is switched on if:

–the a indicator light is not lit up Drying heat is switched off if:

–the a indicator light is lit up

^Press the a button to change the setting.

Depending on the previous setting the

aindicator light will either come on or go out.

^Press button f twice.

^Switch the dishwasher off using the "Off" button.

The change is now stored in memory.

34