Operating the dishwasher
Changing a programme
Important:
If the detergent dispenser flap has already opened, do not change the programme.
A change can be made to the programme selected before the door is closed as follows:
^Press the button for the programme you wish to run.
^Close the door.
The programme cycle begins.
If a programme has already begun, change the programme as follows:
^Open the door.
^Press the "Off" button (16).
^Press the "On" (15) button.
^Press the button for the programme you wish to run.
^Close the door.
The in operation control light will come on.
The programme cycle begins.
Interrupting a programme
A programme is interrupted as soon as the door is opened.
If the door is closed again, the programme will continue from the point it was at before the door was opened.
,Water in the dishwasher may be hot. Danger of scalding! If you have to open the door do so very care- fully.
Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle. Close the door firmly making sure that it clicks into place.
,Do not touch the heating ele- ment during a programme interrup- tion. Danger of burning.
33
