Cleaning and care
To clean the underside of the filter, the flap must be opened:
^Pull back the yellow clip to do this.
^Rinse all parts under running water, using a nylon brush if necessary.
^Then close the flap so that the clip engages. Important: After cleaning make sure that the clip has properly engaged.
^Replace the filter combination so that it lies flat in the base of the wash cab- inet.
^Secure the filter by turning the handle in a clockwise direction.
,Take care when you are fitting the filter combination that it is se- cured in position correctly. Other- wise coarse soil could get into the circulation system and cause a blockage.
37
