Miele dishwashers running shortly after, starting a programme, the in operation control, Problem

Problem solving guide

Problem	Possible cause	Remedy
The dishwasher stops		Before rectifying the prob-
running shortly after		lem you must:
starting a programme,		Switch the dishwasher off.
the in operation control	Water inlet fault.	– Open the stopcock
light is flashing rapidly.	The indicator light "In-	fully.
	let/Drain", seen when the	– Check the water inlet
	door is open, lights up
		filter and clean if nec-
	and flashes alternately.
		essary, see “Cleaning
		the water inlet filter”.
		The Waterproof system
		has reacted.
		– Call the Miele Service
		Department.
The in operation control	The reflector panel was	Re-fit the reflector panel.
light does not come on	not correctly fitted.	See relevant section in the
after starting a		Installation Booklet.
programme.

42