Miele G 1XXX manual Operation, Adjust sensor wash

Models: G 1XXX

1 64
Download 64 pages 6.13 Kb
Page 38
Image 38
Adjust sensor wash

Operation

Adjust sensor wash

You can adjust the sensor wash programme so that it will remove stubborn soiling in a lightly soiled load.

^Switch the dishwasher off with the On/Off button s.

^Press the Start/Stop button in and whilst holding it in switch the dishwasher on using the On/Off button s.

Keep the Start/Stop button pressed in for at least four seconds until the "Start/Stop" indicator light comes on.

If this does not happen, start the procedure from the beginning again.

^Press the Delay start button five times.

The "Delay start" indicator will flash briefly five times at intervals.

The characters flashing in the display show whether the "Adjust sensor wash" function is activated or deactivated.

"p 1": The "Adjust sensor wash" function is activated.

"p 0": The "Adjust sensor wash" function is deactivated.

^To change the setting, press the Start/Stop button.

Switch the dishwasher off with the On/Off button s.

38

Page 38
Image 38
Miele G 1XXX manual Operation, Adjust sensor wash