Operation
Display
The duration of the programme selected appears in hours and minutes in the display before the programme begins. During the programme, the time left until the end of the programme is displayed.
The time displayed may vary with the same programme. This is partly because of the water inlet temperature at each intake, and partly because of the amount and soiling level of the crockery.
When a programme is selected for the first time, the display shows an average time for a cold water intake.
The times shown in the programme chart refer to standard test loads and temperatures.
Each time a programme is run, the electronic unit takes the new conditions into account, and calculates the time required.
Programme sequence indicators
After a programme has been started, the current stage of the programme is indicated by the programme sequence indicator lights.
At the end of a programme
A programme has finished when a "0" appears in the display and the "End" programme sequence indicator lights up.
The dishwasher can now be opened and unloaded (see "Unloading the dishwasher").
,To prevent the risk of steam damage to the worktop edging above the dishwasher, it is advisable to leave the door closed until you are ready to unload the crockery. Alternatively you can open the door fully until the crockery is cool enough to unload. Do not leave the door only partially open.
Switching off
At the end of a programme:
^Switch the dishwasher off with the On/Off button s.
The dishwasher will continue to use electricity until the On/Off button s is switched off.
If the dishwasher is not to be used for a longer period of time, e. g. whilst on holiday, the stopcock should be turned off.
32
