Plumbing
Connection to the water supply
,Water in the dishwasher must not be used as drinking water.
–The dishwasher may be connected to a cold or hot water supply, max.
60 °C. We would only recommend connection to a hot water supply if it is economical, e.g. a solar powered supply. When connected to a hot water supply all programme stages which would otherwise be carried out with cold water will be carried out with hot water.
–The inlet hose is approx. 1.5 m long. A 1.5 metre long flexible metal extension hose, pressure tested to 14000 kPa/ 140 bar, is available as an optional accessory if required.
–A stopcock with a 3/4 " male thread must be provided on site.
–This appliance is constructed to comply with IEC/EN/DIN 61770 // VDE 0700 Section 600, and may be connected to a suitable supply without an extra
–The water pressure (flow pressure at the
If the water pressure is too high, a pressure reducing valve must be fitted.
!The inlet hose must not be shortened or damaged in any way as it contains electrical components (see illustration).
59
