Use
You can now select the detergent used. Availabe selections are: Powder, Gel, "2 in 1" and "3 in 1" tabs.
See "Settings J, Detergent".
Starting a program
^Select Start.
The program begins.
Cancel a program only in the first 5 minutes. Otherwise important program steps (e.g. the water softening) could be interrupted.
The program can be locked. To use this function, see "Settings J - Program lock".
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time shows in the time display.
The running time for the same program may vary depending on the intake water temperature, the load size and soiling.
When a program is selected for the first time, a time is shown which equals an average program running time with cold water.
The time values in the program guide correspond to the program running times with standard loads and standard temperatures.
Each time a program is run, the electronic adjusts the program running time according to the water intake temperature and the load size.
36
