Settings J
Dealer
Demo modes are only for showrooms.
The dishwasher has three demo programs for showrooms.
The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher.
–Demo mode:
The program is started by touching a control. It runs once and must be started again.
–Endless demo mode:
The program starts after it was activated and runs in a loop until it is turned off.
–Demo wash sound:
The program activates the pumps to demonstrate the wash sound.
Turning the demo mode on
^Select the desired option and confirm with OK.
^Confirm the message Activate
demo mode? with OK.
^Touch any control to start the selected demo mode.
^To cancel the demo mode, touch any control again and confirm with OK.
Turning the demo mode off
^Select Off to deactivate the demo mode and confirm with OK.
^Confirm the message Deactivate
demo mode? with OK.
Factory default
All settings can be reset to factory default.
^Confirm the message Reset to
factory default? with OK.
^Confirm the information All settings
are reset to factory default with OK.
Leaving the "Settings J menu"
To leave the "Settings J" touch the + C control. The main menu shows.
52
