Settings J
Detergent
To achieve the best results the used detergent can be set on your dishwasher. The selection allows "Powder", "Gel", "2 in 1" and "3 in 1" tabs. The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time may increase.
Powder
When using powder detergent, salt and rinse aid must be added for best results. See "Filling the salt container" and "Rinse aid". The rinse aid refill message is activated.
Gel
When using gel detergent, salt and rinse aid should be added for best results. See "Filling the salt container" and "Rinse aid". The rinse aid refill message is activated.
2 in 1 tabs
The function "2 in 1" adjusts the program cycle to the use of "2 in 1" detergent products (detergent with rinse aid). The rinse aid dosage and the rinse aid refill message are deactivated.
3 in 1 tabs
The function "3 in 1" adjusts the program cycle to the use of "3 in 1" detergent products (detergent with rinse aid and water softener salt). The rinse aid dosage and rinse aid refill messages are deactivated. The salt usage for the water softener will be reduced to 1/3 and 1/4.
Do not use this extra feature
–when using "2 in 1" detergents (detergent with rinse aid).
–if your tab water has a water hardness of over 380 ppm (21gr/gal) [21°dH]). See also the information from the detergent manufacturer.
The cleaning and drying performance of these detergent products vary.
The detergent selection is set by default to powder detergent.
^Select the detergent used and confirm with OK.
43
