Problems water intake/drain | Miele G 2872 guide

Frequently asked questions

Problems water intake/drain

Issue	Possible fault	Solution
The optical interface
flashes fast, the buzzer
sounds and the display
shows the fault:
No water intake	The water supply is	Open the water supply all
	closed.	the way.
Fault water intake FXX		Before fixing the fault:
		–	Turn the dishwasher off
			.
	Fault F12/F13:	– Open the water supply all
	Fault in the water intake.		the way.
		–	Check and clean the
			water intake filter, see
			"User Maintenance
			Instructions".
		–	The water pressure at the
			water connection is lower
			than 4.35 psi. Consult a
			plumber.

54

Image 54

Miele G 2872 operating instructions Problems water intake/drain

Contents

Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical Safety Installation Use Save These Instructions Disposal of an appliance Guide to the dishwasher Control panel Display function Caring for the environment Energy saving washing Before using for the first time To open the doorTo close the door Language setting Welcome screenClock format Time of day setting Water softener External water softener Filling the salt container Salt refill message Rinse aid Adding rinse aid Rinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Removing the insert Upper basketRemovable spike insert Replacing the insert Adjustable cup racks Coffee bar Universal support bar Adjusting the upper basket Lower basket Foldable spikes Removable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use Detergent Use Adding detergent Turning on Selecting a program Program When to use Program sequence Program guide Usage To normally soiled Pre-rinse Selecting optionsTurbo Soak Starting a program Time display At the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a program Delay start Additional options Starting a program before the delay start has elapsed Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Time of day Setting the clock formatLanguage Set the time of day Powder GelTab Drying Plus Water hardness Adjust Sensor Wash Filter check Reorganize program list Temperature Save options Buzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a program Memory Button toneBrightness RemoteVision Turning the demo mode on Factory defaultLeaving the Settings menu Turning the demo mode off RemoteVision Frequently asked questions Technical faults There may be a Turn the dishwasher off by Problems water intake/drain Flashes fast Issue Possible fault Solution Optical interfaceFault Program Energy General problems with the dishwasher Issue Possible fault Solution Display turns offFollowing A program Issue Possible fault Solution Detergent is leftDispenser at the end Detergent lid Sounds Poor cleaning results Are spotted Issue Possible fault Solution Dishes are not dryGlasses and cutlery White residue is On glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dull Comparison Tests Comparison Tests Repairs After sales servicePC Update MieleCare Transport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door seal Indicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray arms Cleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding Instructions Plumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872