Settings
Rinse aid
For best results the rinse aid dosage can be adjusted.
The dosage can be set between 0 and 6 ml.
The dosage set by default to 3 ml of rinse aid per program.
–Use a higher setting if spots appear on dry glassware.
–Use a lower setting if streaking appears on dishes or glasses.
Use the +/- buttons to selected the desired rinse aid amount and confirm with OK.
Filter check
This selection allows you to set the number of cycles run before the filter check message shows.
You can select between 30 and 60 cycles.
The filter check message is set by default to 40 cycles.
Select the desired number of cycles and confirm with OK.
See "Cleaning and Care - Triple filter system" for more information.
Adjust Sensor Wash
The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling.
Select Yes and confirm with OK .
45
