Automatic mobile unit recognition (AWK)
In operating level C the AWK (optional) attributes a fixed program place to a mobile unit with valid coding.
Program places
The unit coding (on the mobile unit) and the program place with the corresponding program (in the "Profitronic" electronic control unit) must match.
^Each mobile unit must be coded before being used for the first time. See "Mobile unit coding".
^The wash program through which the mobile unit is coded has to be assigned to the relevant program place (operating level D, see the "System function - Selector switch organization" section in the Programming Manual).
Important!
Before starting the program with the "Start" button 6, check if the program needed for this mobile unit is displayed.
Insufficient wash results may occur! Always check that programs for mobile units with AWK (on fixed program places) are not exchanged.
Mobile unit coding
The automatic mobile unit recognition feature assigns a program place to a mobile unit. The mobile units must be coded with a magnetic strip, via a bit combination. In operating level C the only program available for a coded mobile unit is the one assigned to the corresponding program place.
When a coded mobile unit is inserted in the machine and the door closes, the automatic mobile unit recognition selects the assigned program. Be sure no small items connect to the magnetic strip.
Press 6 to start the program.
Coding is made up of 5 bits:
–Bits 1 to 4 define the mobile unit code,
–Bit 5 serves as a control
Bit 6 controls the volume of water intake and the circulation pump for mobile units with side coupling. This setting cannot be changed!
Mobile units without side coupling are coded with tracks which do not contain Bit 6!
16