Miele G 7826, G 7825 manual Serial interface

Serial interface

Each machine is supplied with a 5 m long interface cable for data transfer between the Profitronic system and an external report printer or PC.

The interface cable is rolled up inside the machine and must only be connected by a Miele Service Technician.

The serial interface is RS 232 compatible.

Various printers can be used as external printers:

–Epson-compatible sign-set

–HP Laserjet

For the interface configurations see "PC/Printer Function" in the "Programming Manual".

The address of the 9-pole pin sub-D plug of the serial interface cable: 5GND (ground)

3TXD (transmit) 2RXD (receive)

1-4-6 (linked)

7-8 (linked)

A standard null-modem or laplink cable can be connected.

The extension cable to the printer/PC must not exceed 32 ft. (10 m).

Please note the following when connecting a printer or PC:

–Only use an industry-standard PC or printer.

–When installing the machine take the dimensions of the printer/PC into account.

The printer settings are described in the chapter PC/Printer function in the program manual.

The report printer offers the following print options:

–Program print

–Additional functions print

–Rinse protocol print

–Fault protocol print

32