Operation
C. Automatic mobile unit recognition (AWK)
^Select operating level "C".
^Push the coded mobile unit into place (See, "Setting mobile unit coding").
^Close the door.
Important:
It is absolutely essential to check that the program required for this mobile unit is the one shown in the display, before starting the program by pressing the "Start" button. Otherwise inadequate cleaning could result.
Please make sure, that the places assigned for programs using AWK (Automatic mobile unit recognition) are not changed at random.
^Press the "Start" 6 button.
Document any program and dosage changes.
Program sequence
After being started the program will proceed automatically. It is finished when PROGRAM END appears in the display and the background lighting flashes (press any button to switch off the flashing lights).
The flashing lights can be permanently switched off. See "Programming Manual - System Functions".
Detailed information on program sequences is given in the appendix of the "Programming Manual".
The display background lighting goes out automatically after approximately 15 mins. To bring it back on again press one of the touch buttons.
Turning off
^Press in and release the
^Turn off the water valves.
29
