IMPORTANT SAFETY INSTRUCTIONS
The mobile units and special inserts should only be used for
their specific application.
Empty any containers or utensils before arranging them in the
machine.
Do not allow any remains of acids or solvents, and in particular
hydrochloric acid or chloride solutions to get into the wash cabinet as well as corroding ferrous material. Similarly avoid any materials with a corrosive effect. The presence in compounds of any solvents should be minimal, (especially those in hazard class A1).
Ensure that solutions or steam containing hydrochloric acid do not
come into contact with the stainless steel casing of the machine, to avoid any corrosion damage.
Please follow the installation advice in these instructions and the
separate Installation Instructions.
Using accessories
Only specific additional equipment made by Miele should be
connected to this machine. Consult the Miele Application Specialist on the type and application of such equipment.
Only Miele mobile units, modules and inserts should be used. If
equipment from another manufacturer is used, Miele cannot ensure the cleaning and disinfection results. Damage or injury caused by this are excluded from the warranty.
Disposal of an old appliance
When discarding a lab washer, disconnect it from the power
supply, and cut off the power cord. The old appliance may be contaminated by blood or other body fluids and must be disinfected before disposal.
For environmental and safety reasons ensure the machine is completely drained of any residue water and cleaning agent. (Observe safety regulations and wear safety goggles and gloves). Make the door lock inoperative or remove the door completely, so that children cannot accidentally shut themselves in. Make appropriate arrangements for the safe disposal of the machine.
Machines with tank system, remove the water from the tank before disposing the machine.
The manufacturer cannot be held responsible for any damage caused by
8
