Electrical connection | Miele G 7825, G 7826 specification

Electrical connection

,All electrical work must be carried out by a suitably qualified electrician in accordance with local and national safety regulations.

–Installation, repairs and other work by unqualified persons could be dangerous. The manuafactuer can not be held responsible for unauthorized work.

–The direction the motor spins depends of the electrical connection of the machine. Connect the machine in-phase for clockwise rotation.

The machine must only be operated with the voltage, frequency and fusing shown on the data plate.

The data plate is on the cover plate behind the service panel of the unclean side.

The wiring diagram is secured to the inner side of the service panel.

The unit is convertible for steam or electric heating. Hook-up requirements are as follows: 208 V, 60 Hz, 3 phase, 30 Amps and rated load 10 KW.

WARNING:

THIS APPLIANCE MUST BE GROUNDED

37

Image 37

Miele G 7825, G 7826 manual Electrical connection

Contents

Medium capacity Glassware Washer G 7825 / G Page Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Options Description of the machine Electronic controls Guide to the machine Display Door switch h Start buttonOn/Off button Cursor left Cursor right Unclean side Guide to the machine Clean side G 7826 only Opening the door Opening and closing the doorTo close the door Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Applications Preparing items for cleaningLoading the machine Removing excess soils Applications Injector mobile unit Laboratory glassware LG Transfer cart for loading and unloading the machine Applications Priming the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Adding of liquid detergents and neutralizers Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems Optional Operation Power switchTurning on To change the operating level Fixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the fine filter Cleaning the flat filter Changing the coarse filter Drying unit TA Cleaning and careChanging the fine filter Replacing the print paper Maintenance of report printer OptionReplacing the ribbon cartridge Steam/Electro or Electro/Steam conversion Installation Electrical connection Water connection PlumbingDo not shorten hoses Hot water connection Drainage Technical Data After sales service Disposal of the packing materials Caring for the environmentDisposal of an old appliance Page All rights reserved