Self Cleaning
A tone will sound when the "SELF CLEAN" function has ended and "Ready" will appear in the display.
^ Once the oven has cooled, remove the ash with a damp sponge.
A film may build up on the oven door. This can be removed with a shielded blade scraper or a
The "SELF CLEAN" function will stop,
-if the oven interior is extremely soiled. (Remove large pieces of debris and restart the function.)
-if the "Clear" control is touched.
-if the oven is shut off.
-if there is a power failure.
The display will show "Process interrupted".
The oven door will remain locked until the oven temperature has fallen below 535°F (280°C).
You can set the "SELF CLEAN" function for both ovens at the same time.
However, the cleaning process will run one after another. This means the oven which was programmed first, will be cleaned first.
The status of the cleaning process is shown in the display.
67