Problem solving guide
. . . bars light up or flash in the temperature displays.
Check the temperature displays about 6 hours after switching on the appliance. Only temperatures within the range the appliance can display will be shown.
. . . "F0" to "F5" in one of the temperature displays appears.
There is a fault. Call the Service Department.
. . . the Super freeze indicator light and the temperature display are both flashing at the same time.
There is a fault. Call the Service Department.
. . . the Super freeze indicator light does not light up, even though the appliance is working.
The indicator light is defective. Call the Service Department.
. . . you cannot switch the appliance off.
The safety lock has been activated.
. . . "nA" appears in the freezer section temperature display.
The freezer section temperature has risen too high at some point during the last couple of days because of a power cut.
^Press the alarm off button whilst "nA" is lit up in the display.
The temperature display will show the warmest temperature recorded in the freezer section during the power cut.
Depending on the temperature displayed, you should check the condition of food in the freezer. If it has defrosted or started to defrost, check that it is still safe to use and if so use it as soon as possible. Defrosted food may only be
The warmest temperature will show in the display for about 1 minute. The display will then revert to showing the actual current temperature in the freezer section.
At the end of a power cut, the appliance will start operating again at the last temperature setting selected.
43
