Changing the door hinging
Do not separate the
^Stand the appliance doors up one by one, and slacken the hinges at the front (the hinges remain open).
^Remove caps a from the top and bottom of each door (if the caps are not in place, they will have been supplied separately with the appliance).
^Remove screws b from all of the hinges, and refit each hinge in its diagonally opposite corner.
Do not close up the hinges. Danger of injury.
^Use a powered screwdriver to secure the hinges; screws b are
^Replace caps a in the vacant holes on the opposite side.
To secure the soft-close mechanism
^Place the two doors with the outer side downwards on a stable surface.
^Screw ball joints b of
^Open out
^Hold the
52