Miele KF 9757 ID Building in the appliance, Make sure the two metal edges c are aligned Symbol

Building in the appliance

Securing the appliance doors to the furniture doors:

^Screw each of the fixing brackets a supplied into the pre-drilled holes in the appliance door using hexagonal screw b.

Make sure the two metal edges c are aligned (Symbol II).

^Drill fixing holes d, and screw in the 4 x 14 mm screws e.

(With large furniture doors, attach a second pair of fixing brackets a in the handle region of the doors. Use the pre-drilled holes in the appliance doors.)

–Align depth "Z" on the furniture door: Loosen screws f at the top of the appliance doors, and loosen the hexagon-headed screw g at the bottom of the fixing bracket. By moving the furniture doors, create a gap of 2 mm between the furniture door and the front edge of the niche.

^Close both of the doors, and align them with the neighbouring furniture doors.

^Whilst counterholding adjusting bolts c with a screwdriver, tighten nuts a on the appliance doors with ring spanner b.

^Cover strip d must be completely hidden in the niche, and must not protrude.

^Tighten all screws once again.

^Secure the appliance one more time using screw f through the round hole in the plastic bracket e.

^Close the plastic bracket.

58