Changing the door hinging
Before changing the hinging, remove any items of food from the shelves in the appliance door.
Removing the top
^ Open the top door of the appliance. |
^Loosen the panel a from the
Be careful not to damage the door seal.
If the door seal is damaged, the appliance door may not close properly and there will not be enough refrigeration!
^Slide the panel a in the direction of the appliance and leave it hanging between the door and the appliance.
^Place the securing device b (supplied with the appliance) on the
With the securing device in place, the joint cannot snap shut. Do not remove the securing device until instructed to!
^Using a flathead screwdriver, carefully lift the top and the bottom of the cover d from the retainer.
^Push the pin e up and out using a flathead screwdriver.
50
