Miele KFN 14943 SD ED installation instructions Mounting the top door of the appliance

Changing the door hinging

^Hang the panel b on the shock absorber arm d.

^Pull the shock absorber arm d towards the hinge bracket and insert the pin e from the top so that the square rests in the recess.

^Put on the cover f in such a way that it engages.

Take care that the cover f sits correctly to ensure that the door closes properly and the pin is secured.

^ Remove the securing device g.

^Place the panel b onto the soft-close mechanism from above, engaging it at the bottom first and then at the top.

^Close the bottom door of the appliance.

Mounting the top door of the appliance:

^Place the top door of the appliance onto the bearing pin i in in the middle of the appliance.

^Close the top door of the appliance.

^Put the hinge bracket n on the opposite side and and fasten it with the screws m.

The screw holes may have to be pre-punched or use a power screwdriver.

^Now place the cover k on the other side.

^Align the appliance door with the appliance housing via the elongated holes in the bottom hinge bracket . Tighten the screws.

56