How to switch to a different gas type
After switching over
^Use the reverse order to
^Before putting the upper part of the appliance back in place, light each burner with matches to test the seal on all the gas flow parts.
^After testing, set aside the loose burner parts.
^Put the upper part of the appliance back in place.
^Screw down the lower part of the burner, then put the loose burner parts back into place, making sure to follow the right order.
^Put the control knob back on.
^Finally, check the flame behaviour of each burner.
The flame must not go out in the low setting, even if the control knob is quickly turned from "high" to "low".
At the high setting, the flame needs to burn with a clearly visible core.
^In the nozzle pack, find the appropriate sticker for the new gas type and stick it over top of the previous sticker.
41
