Use
Touch controls
The control panel on your ceramic cooktop is equipped with electronic sensors. They respond to a finger touch.
To operate the burners, simply touch the corresponding sensor area(s). Each time a command is registered, a signal will be heard.
Be sure to touch only the desired sensor area and keep the control panel clean and clear. Otherwise, the touch controls may not respond, or unintentional commands may be given, even causing the cooktop to switch off automatically (see the section on "Safety
Turning on the cooktop
Put a pot or pan on the desired burner.
Touch the ON/OFF "" cooktop touch control.
You will see a dash - in each of the burner displays, and the On/Off indicator will light. If a setting is not chosen within a few seconds the cooktop will turn itself off as a safety measure.
Turning on a burner
Touch the On/Off touch control for the desired burner.
The respective burner display shows 0.
Select a power level between 1 and 9 by pressing the + or - control.
When turning on the cooktop you can decide whether you want to cook with auto heat or not. See
Turn on with + to: cook without auto-heat.
Turn on with – to: cook with auto-heat.
17
