Safety features
Stop and Go
Your appliance has a Stop and Go feature which, when activated, reduces the power of all burners that have been switched on.
If you then deactivate the feature, the burners will automatically return to the previous level.
If the feature is not deactivated, the cooktop will turn off after 1 hour.
If you wish to use this feature, you will need to alter the factory setting (see "Programming - P1").
To activate Stop and Go:
Press and hold the sensor $ until you hear two consecutive beeps.
Be careful not to continue touching the $ sensor for too long, as this will activate the safety lock.
The Child Safety Lock indicator will flash. The power for the activated burner(s) will reduce to level 1, and 1 will appear in the respective display.
When activating "Stop and Go":
–the countdown of the programmed time for the automatic
–the timer will continue without interruption.
To deactivate Stop and Go:
Press and hold the $ control until the indicator goes out.
The burners will now run at the level previously set.
28