Electrical connection
CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power supply or manually "tripping" the circuit breaker.
Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous.
Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent appliance damage. Consult an electrician if in doubt.
Only operate the cooktop after it has been installed into the countertop.
Installer:
Please leave these instructions with the consumer.
Power supply
Be sure your electrical supply matches the data plate.
Connection
The cooktop is equipped with a flexible metal conduit encasing 3 wires ready for connection to a grounded power supply.
208/240 V, 60 Hz, 40 A fuse rating
Black wire: connect to L1 (hot)
Red wire: connect to L2 (hot)
Green wire: connect to GND (ground)
A dedicated line and junction box should be used to connect the cooktop to a 40 A circuit..
For further information, see the wiring diagram provided with the appliance.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED!
47