Miele M 635 EG Electrical connection U.K, Green/yellow = Earth Blue = Neutral Brown = Live

Electrical connection

Before connecting the appliance, ensure that it has not been damaged in any way. Do not use a damaged appliance.

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person in strict accordance with na- tional and local safety regulations.

The appliance is supplied with a cable and moulded plug ready for connection to a 230-240 V/50 Hz a.c. single phase supply.

The voltage, rated load and fusing are given on the data plate which is located externally on the rear wall of the appli- ance. Please ensure that these match the household mains supply.

Connection should be made via a fused connection unit or a fused plug and a suitable switched socket, or via a suit- able isolator, which complies with na- tional and local safety regulations, and the on/off switch should be easily ac- cessible after the appliance has been installed.

If the socket is not accessible after in- stallation (depending on country) an additional means of disconnection must be provided for all poles.

When switched off there must be an all-pole gap of 3 mm in the isolator switch (including switch, fuses and re- lays acc. to EN 60335).

For extra safety it is advisable to install a residual current device with a trip cur- rent of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

If the appliance is connected via an iso- lator switch the plug must be cut off and rendered useless.

Important

The wires in the mains lead of this ap- pliance are coloured in accordance with the following code:

Green/yellow = Earth

Blue = Neutral

Brown = Live

As the colours of the wires in the mains lead of this appliance may not corre- spond with the markings identifying the terminals in your plug, proceed as fol- lows:

The wire coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol z or coloured green or green and yellow.

The wire coloured blue must be con- nected to the terminal marked with the letter "N" or coloured black. The wire coloured brown must be connected to the terminal marked with the letter "L" or coloured red.

WARNING

THIS APPLIANCE MUST BE

EARTHED

38