Operation
Programming the end of cooking time
The duration and end of a process can be
^Proceed as for starting a process.
^However at the end do not press the START button. Instead press the r button.
The time of day will flash in the dis- play. (The programme duration is au- tomatically added ).
^Use the rotary selector to enter the time you wish the process to finish. The h symbol flashes, the end time will light up as well as the symbols for
the method of operation selected and r as a symbol for a programmed end of cooking time.
^Press START.
r and the time of day will light up in the display.
The appliance will switch on automati- cally and then off at the selected end of cooking time.
If the end of cooking time is pro- grammed for microwave operation make sure that there is food in the oven.
To check the end of cooking time
It is possible to check the end of cook- ing time before a programmed process has started.
^Press r , the selected method of operation and the
Large cooking dishes
If the dish extends beyond the size of the turntable it might not turn around in the oven. If this is the case the turntable must be switched off.
^Press ä.
If the door is opened before a start- ing time has commenced
^Press the h button again after clos- ing the door. The appliance will then start at the
To change programmed times
^Press the Stop/C button and programme the start time in again.
To delete programmed times
^Press the Stop/C button.
24
