Installation and connection
Rear view
aProtruding lid for holding when moving the dryer (see arrows)
bMains connection cable
Transporting the dryer
To manoeuvre the dryer out of its packing case to its installation site,
–hold it by the front feet
–as well as by the edge of the lid where it protrudes to the rear of the dryer.
Only transport the dryer as
shown in the following illustrations.
If transporting the dryer at an angle, only tip towards the left side.
If the tumble dryer has not been transported as described, then it must be left to stand for at least 1 hour before it is connected to the electricity supply. Otherwise the heat pump can be damaged.
38
