Settings

Anti-crease

Helps prevent creasing, if laundry is not normally removed immediately after the end of a programme. The drum rotates at intervals for 2 hours after the end of a programme.

The anti-crease function

is activated when the tumble dryer is delivered. You can shorten the duration of the anti-crease phase or deactivate it if wished.

can be used for all programmes, except Woollens handcare.

should always be switched on.

Follow steps (,,...) to programme and store in memory.

Before you begin, ensure that:

The tumble dryer is switched off.

The door is closed.

The programme selector is pointing to Finish.

Press Start and keep it pressed in whilst carrying out steps -.

Switch the dryer on.

Wait until the indicator light for the Start button comes on . . .

. . . and then release the Start button.

Turn the programme selector to Cottons Normal.

The Empty container indicator light will flash three times.

The option selected will be displayed by a number which will alternate with .

Anti-crease action off

Anti-crease 1 h

(The Clean out airways will also flash once)

Anti-crease 2 h

(The Clean out airways will also flash twice)

Pressing the Start button switches between the options.

Switch the dryer off.

The setting you have selected is now stored in memory. You can change it again at any time.

To check the setting:

Carry out steps -.

Switch the dryer off after checking.

47

Page 47
Image 47
Miele T 8164 WP operating instructions  Anti-crease action off  Anti-crease 1 h,  Anti-crease 2 h