Settings
Standby
To save energy, the display goes out after 10 minutes and the indicator light for the Start button starts flashing slowly.
To come out of Standby mode:
Move the programme selector or press Start. Neither will have any effect if a programme is running.
On
Standby function is activated and the indicator lights will go out after 10 minutes:
–if a programme is not selected after the dryer has been switched on.
–after a programme has started.
They will, however come on for 10 minutes at the end of the programme or the end of the
Not in current programme (factory default setting)
As described under "On".
However, indicator lights will stay on when the programme has started and remain visible during the programme.
Off
Indicator lights will stay on while the dryer is switched off.
Follow steps (,, ...) to programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
–The programme selector is pointing to Finish.
Press Start and keep it pressed in whilst carrying out steps
Switch the dryer on.
Wait until the indicator light for the Start button comes on . . .
. . . and then release the Start button.
Turn the programme selector to Cottons Machine iron.
The Empty container indicator light will flash eight times.
50
