Miele T 8164 WP instruction

Operating instructions

Heat-pump dryer

T 8164 WP

	en-GB
To avoid the risk of accidents or damage to the
appliance, it is essential to read these
instructions before it is installed and used for the	M.-Nr. 09 557 600
first time.	M.-Nr. 09 557 600

Image 1

Miele T 8164 WP operating instructions Operating instructions Heat-pump dryer 8164 WP

Contents

Operating instructions Heat-pump dryer 8164 WP Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Contents Correct application Safety with children Technical safety Page Correct use Page Page Page Accessories Control panel Operating the tumble dryer Display h min Before using for the first timeDrum lighting Display shows Laundry care Care symbolsTips on drying Drying Brief instructions How to dry correctly Sort the laundry  Turn on the tumble dryer  Select a programme  Remove the laundry when the programme has finished Start the programme Once a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Programme duration Cottons Max. load 7.0 kg Normal+, Normal Programme overviewNormal Gentle tumble Hand iron, Machine iron Automatic plus Max. load 3.5 kg Minimum iron Max. load 3.5 kg Normal, Hand ironTimed drying Max. load 7.0 kg Min warm air Min cool air Woollens Max. load 2.0 kg Gentle smoothing Max. load 1.0 kg Emptying the condensed water container Cleaning and care When to clean the fine filter When to clean the fluff filters When to clean Cleaning the fluff filtersCleaning them whilst dry Cleaning them with water Replacing them Fine filter Cleaning the fine filterRemoving the fine filter Cleaning the cover for the fine filter Replacing Tumble dryer Check and fault messages Problem solving guide There is a build-up of fluff in the airways Problem solving guide Unsatisfactory drying results Other problems Even switches off Problem Cause and remedy Drying processGoes on too long or Before starting another programme Changing the lamp Guarantee After sales serviceRepairs Dryer basket Front view Installation and connection Transporting the dryer Rear view Installation Levelling the dryer Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Electrical connection U.K Non-rewireable plugs BS Automatic plus Consumption data Technical data Page To check the setting Settings Laundry will be drier  Carry out steps -  Switch the dryer off after checking  Anti-crease action off  Anti-crease 1 h Anti-crease Anti-crease 2 h Switching the buzzer on/off Clean out airways indicator light will also flash once Standby Not in current programme factory default settingOff  Off  On  Not in current programme factory default setting Gentle smoothing Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/4613 Nr 557 600