Troubleshooting

 

 

 

 

 

 

Fault messages in the display

 

 

 

 

Problem

Possible cause

Remedy￿

 

 

 

The display lights up ￿

– The water outlet is

– Clean the drain filter and

and

restricted or

pump.

Drain fault

blocked.

– The max. drain pump

flashes.

– The drain hose is

height (delivery head) is

 

sitting too high.

1m.

 

 

 

The display lights up ￿

The water inlet is

Check whether:

and

blocked or restricted.

– the stopcock is open

Water inlet fault

 

enough.

flashes.

 

– the inlet hose is pinched or

 

 

bent.

 

 

– the water pressure is too

 

 

low.

 

 

 

The display lights up ￿

The water protection

Call the service department.

and

system was triggered.

 

Waterproof fault

 

 

flashes.

 

 

 

 

 

The display lights up ￿

There is a fault.

Re-start the program.

and

 

If the fault message appears

Technical fault

 

again, call Customer Service.

flashes.

 

 

 

 

 

The display flashes

Excessive foam has

Use less detergent next time,

Anti-crease

built up during

and check the recommended

Chk detergent

washing.

doses on the package.

 

 

 

￿To switch off the fault message: Use the I-On/0-Offbutton to switch the washer off.

35

Page 35
Image 35
Miele W 1612 operating instructions Fault messages in the display, Problem Possible cause Remedy Display lights up, Flashes