Drainage system
The appliance drains through a pump
with a 1m delivery head. For the water
to drain freely, the hose must be free of
kinks. The swivel elbow at the end of
the hose can be turned in either
direction, or removed as needed with a
sharp twist and pull.
If required, the hose can be extended
to a length of 5m. The necessary parts
can be ordered through your Miele
dealer or Miele Customer Service.
For delivery heads over 1m (up to a
max. of 1.8 m), contact your Miele
Customer Service for a replacement
pump and with a part # 1053992.
Drain hose connection:
1. Hang directly into a washbasin or
sink:
Please note:
– Secure the hose over the edge so
that it will not slip.
–Make sure that the water can drain
away freely without hindrance.
Otherwise, the water could overflow
or be sucked back up into the
washing machine.
2. Connect securely to a plastic drain
pipe with a rubber sleeve (not-return
valve not required).
3. Connect securely to a floor gully.
4. Attach to a washbasin with a plastic
fitting.
Installation and connection
51