Detergent
The right amount to dispense will depend on the following:
–How soiled the laundry is
lightly soiled
No visible dirt or stains. Possibly slight body odour.
moderately soiled
Visibly dirty and/or just a few light stains.
heavily soiled
Visibly dirty and stained, with dried- on soiling.
–The size of the load
–The water hardness
If you do not know the water hardness level in your area, contact your local water utility.
Water hardness levels
Range | Total hardness | Total harndess |
| in ppm | in grains/ |
|
| gallon US |
|
|
|
soft (I) | 0 - 130 | 0 - 8,4 |
medium (II) | 130 - 250 | 8,4 - 14 |
|
|
|
hard to very | more than 250 | more than 14 |
hard (III) |
|
|
Water softener
If your water is in class II or III, you can add a water softener to help cut down on the use of detergent. Consult the package for dosing. First add the detergent, then add the water softener.
In this case, you can dose the detergent as you would for class I.
Washing with several components
If you are using several different products in the wash (e.g., special application detergents), Miele recommends loading the products in the following order into compartment :
1.Detergent
2.Water softener
3.Stain remover
This will help the products flow smoothly into the wash drum.
29
